Juniper Times

Latest News Magazine

How to program an RCA universal remote

Keeping up with the bevy of remotes in your audiovisual stockpile is never an easy feat, especially when you need three of them (or more) just to be able to watch a Blu-ray. Fortunately, there’s an inexpensive way to consolidate your remote controller count (and/or replace a dearly departed TV remote), thanks to the folks at RCA. If you’ve picked yourself up an RCA universal remote, here’s how to program it.

The brand produces a line of universal remotes that are simple to operate, reasonably priced, and a relative breeze to program. And to help you through the programming process, we’ve put together this step-by-step guide.

amazon cloud cam review remotes scale
Bill Roberson/Digital Trends

A step-by-step guide

The first thing you’re going to want to do is make sure your new TV remote has batteries in it and that the components and devices you want to sync are properly hooked up. All set? Now it’s time to link your RCA universal remote control to the hardware. There’s more than one way to do that, and we’ve covered each method below.

Auto programming

The easiest and fastest way to begin syncing your devices with your universal remote control is to input codes automatically.

Step 1: Turn on the component or device you want to set up, such as your TV or Blu-ray player. In this example, we’ll go with the TV.

Step 2: Press and release the TV button. The RCA remote’s On/Off button will light up and should remain lit.

Step 3: Now, simultaneously press and hold the TV button and the On/off button. The illuminated On/Off button will turn off. After a moment, however, it should turn back on.

Step 4: Release both buttons after the On/Off button relights. It should remain on.

Step 5: Now, press and release the Play button on your RCA remote. If the TV (or component that you are programming) does not turn off after five seconds, continue to hit the Play button every five seconds until the TV turns off.

Step 6: Next, press and release the Reverse button. Wait to see if the TV turns back on, and press it every three seconds until it does.

Step 7: Press and release the Play button once more to save the programming for the device in your remote’s memory.

Step 8: Repeat steps 1 to 7 for each additional device you wish to pair with your remote.

Be aware that you might cause issues with the syncing mechanism if you press incorrect buttons. There’s certainly a learning curve that involves some trial and error to set up your remote successfully. If you come to a point where you need to start over, all you’ll need to do is restart the hardware, take out the remote batteries, put them back in, and go through the steps once more.

how to program an rca universal remote remotes getty
David Becker/Getty Images

Direct code programming

Your RCA remote will come with a special codebook that can help you input various codes for countless devices manually. Don’t worry if you lose the booklet or accidentally throw it away. We’ve got you covered. Every RCA universal remote code you’ll need is listed right here.

Now let’s discuss how to program a current TV to your new RCA universal remote with the correct code.

Step 1: Go to the TV section of the codebook, find your TV brand, and circle all the available codes.

Step 2: Power on your TV.

Step 3: Hold down the TV button on your universal remote until you see the power button light up.

Step 4: Keep holding the TV button while you input the first marked code. (Note that the codes will be four to five digits long, depending on the remote’s model.)

Step 5: Once you’ve entered the device code, keep holding the TV button. If the power button is still illuminated, that indicates you’ve entered the code correctly. Let go of the TV button and start testing device commands. If everything is working properly, commands for power, volume, and the menu should now control your TV.

Step 6: If the power button blinks four times, that signals that the device code you entered was incorrect. Go back through steps 2 to 4 for the next available code in the booklet.

If after all this, the RCA universal remote just isn’t doing it for you, there are several other universal remotes on the market you can try, such as the GE 33709, which is a great bare-bones option that is compatible with many AV devices.

Editors’ Recommendations